TTE® GRAVEL

TTE® GRAVEL – for permeable and level gravel surfaces

TTE® reinforces gravel surfaces such that they can bear loads while remaining permanently level and permeable to water. The backfill material is held securely in place even on slopes, and rainwater seeps away unhindered.

Simple and durable stabilisation of gravel surface courses

Unpaved gravel surfaces are permeable and natural. They are also inexpensive to install, but not to maintain. They need to be renewed regularly because of their low load-bearing capacity. The compacted yet loose material is repeatedly loosened and displaced from use as well as by precipitation. The resulting potholes, along with puddles, washed-out gutters and uneven surface are not a pleasurable experience for motorists, cyclists or pedestrians.

TTE^® is ideal for gravel stabilisation thanks to its thick-walled fins and resilient connection system. Compared to many gravel grids, gravel stabilisation honeycombs and similar plastic soil grids, this ensures a high load-bearing capacity and lasting durability. TTE^® composite plates distribute the load generated by vehicles over a wide area. The resulting load-bearing capacity reduces the thickness of the design, while also permanently ensuring evenness of the surface. The chambers not only reinforce the loose fill material, but also protect it against erosion. This reduces the maintenance requirements of gravel and crushed stone surfaces to a minimum.

100% decentralised seepage
Maintenance-free gravel surfaces
High load bearing capacity and load distribution
For loads up to 60 t
Infiltration-trench with high water storage capacity
Open joints & drainage channels
Low structure thickness of 10 - 40 cm

Reinforced gravel surfaces as near-surface infiltration trenches

In order for gravel surfaces to be usable, they must be heavily compacted to create a load-bearing surface. As a result, they lose their permeability, which is why they can often no longer absorb heavy precipitation. Combined with potholes, this results in user-unfriendly conditions and an unsightly appearance.

TTE^® GRAVEL offers the possibility of using water-permeable and water-retaining fill materials thanks to its load distribution over a wide area. The solid soil grids are filled with crushed stone and gravel with a size of 8/11 mm to 11/16 mm, i.e. without fine particles. These are highly permeable, but would not create a paved surface without the reinforcing chambers. Coarse gravel mixes measuring 2/32 mm or 5/45 mm are also used for the base course. Thanks to their large pore volume, these act like an infiltration trench. In this manner, heavy precipitation can be stored in the structure and seep into the ground with a time delay. The result is permeable, resilient gravel and crushed stone surfaces for natural, decentralised stormwater management.

We offer seepage certificates at no cost for your project.

Flexible combinations with TTE® PAVE

Our TTE^® paving stone was designed specifically for the TTE^® plastic grid and enables a wide range of design options for combining paving and green areas. For example, parking space markings can be created very easily using the system. In the areas of the lanes exposed to wear and tear, the paving stone component increases the load-bearing capacity. Thus, greened parking spaces can be designed individually and adapted even for intensive use.

Kérje ajánlatunkat

Szakembereink már egészen a tervezési szakaszban segítik berendezéseink rendszerbe foglalását és hasznosítását.

Kérje szakmai ajánlatunkat kérdőívünk kitöltésével.